How Many Watts Does an AC Use? Central, Window & Portable (2026)

A central air conditioner typically uses 3,000–5,000 watts. A window or room unit uses 500–1,500 watts. Read on for how to calculate your specific unit’s kWh usage and cost.

Air conditioning is a creature comfort we’ve come to know as essential. You might understand that running an air conditioner increases energy consumption, but do you know the actual AC unit wattage in your home? 

Understanding how many watts of power your air conditioner uses is crucial for managing your energy usage and bills, as well as reducing your environmental impact. For homeowners interested in going solar, getting a baseline of your home’s energy consumption is especially vital, including major appliances like air conditioning and refrigeration. A central air conditioner is the power consumption giant of an average home. The most recent report from the U.S. Energy Information Administration found that air conditioning accounted for 19% of total household electricity consumption. 

Want to see how solar can help cut your electric bill, with just your zip code? Check out our marketplace.

Factors like air conditioner type, efficiency rating, home size, and geographical environment can all play a role in how much power your air conditioner uses. In this article, we’ll break down how air conditioners consume electricity, explore the factors that affect energy usage, and provide tips to optimize your cooling system for maximum efficiency and savings. 

In this article: 

• How much power do AC units use?
• How many watts does a portable air conditioner use?
• AC energy terms explained: key terms you should know
• How to calculate AC energy consumption
• How to determine if your AC unit is using too much power
• Factors that affect AC energy consumption
• Tips to reduce AC energy usage
• Take control of your home’s energy costs
• Frequently asked questions

How much power do AC units use? 

First, let’s answer the key question: While the running wattage of your AC unit can vary significantly, on average:

• A central air conditioner uses 3,000 to 5,000 watts
• A single room air conditioner will uses 500 to 1,500 watts

In an average-sized home, central air conditioning can consume more than 2,000 kilowatt-hours (kWh) of electricity per year, according to the U.S. Department of Energy (DOE). That kind of energy use can make air conditioning one of the largest contributors to your summer electric bill, especially in homes with central air or in hotter climates.

Want to learn more? Read on to get a more complete view of your AC’s energy consumption

How many watts does a portable air conditioner use?

A portable air conditioner typically uses 800 to 1,500 watts — more than a window unit of similar cooling capacity, since portable units lose some efficiency to the exhaust hose and single-cabinet design.

Here’s how portable AC wattage breaks down by BTU rating:

BTU rating	Typical wattage	Typical SEER range
8,000 BTU	700–800 W	10–12
10,000 BTU	850–950 W	10–13
12,000 BTU	1,000–1,150 W	10–13
15,000 BTU	1,300–1,500 W	9–12

Run a 10,000 BTU portable unit for 8 hours a day at 900 watts, and you’re using about 7.2 kWh (900 × 8 ÷ 1,000) — roughly $1.15 a day at the national average electricity rate.

See how many solar panels it would take to cover that — get your estimate in 90 seconds.

AC energy terms explained: watts, BTUs, SEER, and more

When trying to understand your energy consumption as it relates to your AC, there are a few terms you need to know:

Watts (s) and Kilowatts (kW)

Watts are a unit of power, which is the rate energy is used, transferred, or produced. In electrical systems, watts are used to describe how much electric power a device consumes. In other words, watts measure how fast electricity is being consumed or generated. 

• 1,000 watts (w) = 1 kilowatt (1 kW)
• 1,000,000 watts (w) = 1 megawatt (1 MW)

Running Watts

Running watts refer to the amount of energy your AC unit uses as it continually cools your space over long periods of time. In most homes, the AC unit runs fairly consistently throughout the warmer months. There may be brief lulls in activity once the space is cooled, but the system will undoubtedly kick back in and run for another stint when the temperatures rise again. 

Starting Watts

Starting watts, on the other hand, refers to the short-term energy boost your AC unit needs to get going. When your AC fires up, it needs a burst of power — called “starting” or “surge” watts — typically 2–3 times its normal running wattage to spin up the compressor. This initial spike will taper down into running wattage, which is the main number you need to be concerned with when it comes to energy efficiency.

Watt-Hours

Watt-hours are a measure of energy consumption that represents the amount of power (watts) used by your AC unit over time — which is crucial for estimating electricity usage and overall cost. On your electricity bill, you’ll see it displayed as kilowatt-hours (kWh).

To calculate daily usage, multiply the wattage by the number of hours the AC runs. For example, for a 1,500-watt portable AC unit that runs 8 hours a day you would multiply 1,500 x 8 to get the total watt-hours of 12,000, or 12 kWh. 

(It’s important to distinguish kilowatt-hours, not kilowatts — learn the difference between kW vs. kWh here.) 

British Thermal Unit (BTU)

British Thermal Units are commonly used to describe an air conditioning system’s cooling capacity. Simply put, a BTU is a unit of measurement used to quantify the amount of heat required to raise the temperature of one pound of water by one degree. The larger the space that needs cooling, the more BTUs you need to power your AC system. For instance, a 150 sq ft room might need a 5,000-6,500 BTUs/h unit to cool. However, this can depend on the ceiling height, local climate, window size and shade in the room, as well as the efficiency of the unit. 

Seasonal Energy Efficiency Ratio (SEER)

Seasonal Energy Efficiency Ratio (SEER) is a rating that evaluates the efficiency of AC and heating systems. The SEER helps consumers understand how much energy and money the unit requires to cool effectively over a single year. SEER is calculated by dividing the cooling output of a system by its overall power consumption during the warm part of the year. 

How to calculate AC energy consumption

Now that we know the key terms, we’re ready to calculate AC energy consumption. There are a couple of methods that will give you accurate measurements of how much electricity your AC unit uses. While the price of energy can vary by location, using either of these methods will provide you with a good grasp of your unit’s energy consumption. 

Method 1: Use your old energy bills

By digging into old energy bills and making some comparisons, you can get a good ballpark estimate of your AC unit’s energy consumption. 

• Start by grabbing a bill from last year’s peak cooling months (like July) and jotting down the total kilowatt-hours (kWh) used. 
• Then, take a look at a bill from a month with cooler temperatures, when you’re less likely to  use the HVAC system (like October), and write down the kWh usage for that month.
  • The bill from low-usage months should reflect standard wattage for everyday appliances, such as refrigerators and lighting, while the higher bill will include wattage from the AC unit.
• So, to get a good idea of the energy your AC used, simply subtract the low-usage month kWh from the peak-month kWh.
  • Example: 1,000 kWh (July) − 300 kWh (October) = 700 kWh of energy used by your AC.

Just make sure your “low” month doesn’t include electric heating, otherwise you’ll understate your AC use.

Method 2: Use your unit’s specs

This method requires a little research and some math, but it will give you a good approximation of your unit’s wattage and daily energy consumption.

• First, locate the AC’s cooling capacity (in BTU/h) and the Seasonal Energy‑Efficiency Ratio (SEER) on the yellow Energy Guide sticker or model‑number plate.
• Next, calculate the unit’s average running wattage by dividing the BTU rating by the SEER value
  • Formula: Average Wattage (W) = Cooling Capacity (BTU/h) ÷ SEER
• Finally, estimate daily energy use by multiplying that wattage by your expected run‑time and dividing by 1,000 to convert to kilowatt‑hours
  • Formula: Daily kWh = (Average Wattage × Hours per Day) ÷ 1,000

For example, a 12,000 BTU/h window unit with a 15 SEER rating runs at about 800 W (12,000 BTU/h ÷ 15 SEER). If used for 8 hours a day, it consumes roughly 6.4 kWh daily (800 W × 8 hours) ÷ 1,000).

Signs your AC unit is using too much power

There are a few telltale signs that your AC unit is using too much energy. Always look for these signs, especially if your unit is older and/or hasn’t been routinely maintained. If you notice anything concerning, it’s a good idea to get the unit professionally inspected:

• A sudden spike in your energy bill for no reason — you should expect energy bills to be higher in the warmer months, but if you see a spike in the fall, for example, your unit may be drawing too much power 

• Inconsistent cooling in different rooms 
• Frequent powering on and off
• Strange noises coming from the unit
• Clogged air filters, despite regularly changing filters

Factors that affect AC energy consumption

Multiple factors influence how much energy your air conditioner uses. Understanding these factors can help you save electricity and improve efficiency when possible. 

Type of AC unit

There are a few types of AC units that cater to different needs, namely central AC units, split systems, portable systems, and window units. Each system type offers unique advantages depending on the amount of space you have and your budget.

• Central air conditioner systems are designed to cool entire homes by distributing cooled air through air ducts. These units are made for larger spaces, controlled by a single thermostat, and can be highly efficient for whole-home cooling, depending on the system’s SEER rating and proper installation.
• Ductless mini-split air conditioners use an outdoor compressor and one or more indoor air-handling units (which differ from a traditional thermostat). Mini-split systems are highly energy-efficient and made for zone-specific cooling, making them perfect for homes without air ducts. 

• Portable air conditioners are freestanding units designed to cool a single room at a time. They can be moved from room to room, but still require a window for the exhaust hose and are usually less energy-efficient (and a bit noisier) than comparable window units. 
• Window units are compact systems installed into a window frame. They are often more affordable upfront than portable air conditioners. While cooling capacities vary by model for both types, it’s important to compare BTU ratings directly rather than assuming one type is always less powerful. 

So is a window AC actually using a lot of electricity? Not really — a 1,000-watt window unit running 8 hours a day uses about the same energy as a space heater on a similar schedule, and far less than a hair dryer run continuously. It adds up over a summer, but it’s nowhere near the biggest draw on your bill — central AC and electric water heating typically outpace it by several times over.

Size and capacity

The size of an AC unit is measured by how much heat it can extract from a space per hour. The unit itself and the area of space the unit is meant to cool will directly affect energy usage. Having the wrong size unit in a space quickly leads to inefficiency and throws off the rated capacity — which indicates a unit’s cooling ability (typically in BTU/h). The power draw (in watts) under typical operating conditions is related to this capacity and the unit’s energy efficiency.

An AC unit that’s too small for a space will run continuously to meet demand, resulting in higher energy usage and wear and tear on the system. A unit that’s too big for a space, on the other hand, will cycle on and off frequently (short cycling), wasting energy and reducing efficiency. This is why it’s crucial to get the right-sized unit for your home. 

Energy efficiency rating

The energy efficiency of your AC unit can impact its energy consumption. Units with a higher SEER generally use less electricity. In fact, a home cooling guide from the DOE states you can reduce air conditioning energy use by 20-50% by switching to a high-efficiency model, along with taking other precautions to lower your home cooling costs.

Home insulation and air sealing

Insulation lowers heating and cooling costs and boosts comfort by slowing heat flow. Even a well‑built home can trim energy bills by adding more insulation in attics, walls, or crawl spaces.

Alongside insulation, air sealing prevents conditioned air from escaping and hot outdoor air from sneaking in. The DOE also reports that air leaks in ductwork alone can waste about 30% of a cooling system’s energy. Simple fixes, like caulking cracks, weather‑stripping doors and windows, and sealing duct joints, deliver some of the fastest paybacks in home efficiency.

The best way to identify where your home is losing the most energy is with a home energy assessment. The DOE offers helpful resources on professional and DIY home energy assessments. Many utilities and state programs provide free audits as well: Duke Energy Florida’s Home Energy Check is available online, by phone, or in person, and New York homeowners can request a no‑cost energy assessment through NYSERDA‑approved auditors.

Local climate and conditions 

Your local environment — humidity, airborne dust, salt air near coasts, and even nearby trees — affects how hard your HVAC works and how quickly components wear out. High humidity makes coils sweat, dusty or salty air clogs filters faster, and debris around your outdoor unit can block airflow. Regular filter changes and coil cleanings help prevent these local stresses from driving up your AC’s energy use.

Temperature swings and seasonal demand

On hot summer days, when temperatures soar, your AC runs nearly nonstop, driving up both your electricity use and your bill. In winter, electric heating or heat pumps pull extra power when it’s cold. The more extreme the weather, the more expensive your cooling or heating costs will be. Utilities also often raise rates during these peak seasons, so track your seasonal rate schedule and plan maintenance or pre-cooling during lower-cost periods.

Tips to reduce AC energy usage 

There are a few steps you can take to reduce AC energy usage, regardless of the type of unit you have, home size, or environmental factors. 

Supercooling

Depending on your utility company and rate plan, energy costs are often lower during off-peak hours, which are periods during the day when electricity demand is relatively low and utilities often charge lower rates for energy consumption. Off-peak hours can differ by location and utility company, but are typically weekday mornings and overnight. 

For that reason, some homeowners engage in supercooling, which is essentially freezing your home at night when costs are lower and relying on that stored cold during the day (rather than running the AC during peak hours). For better energy efficiency, turn your AC unit temperature down significantly at night to take advantage of lower costs. Then, in the morning, set it at a more moderate temperature (higher than you’d normally be comfortable with) and try to refrain from frequently opening doors or windows.

Using a programmable thermostat

A smart thermostat can significantly reduce your AC unit’s energy consumption via a number of different energy-efficient adjustments and schedules. An ENERGY STAR smart thermostat can provide up to 8% savings on heating and cooling bills. 

By pre-programming the thermostat, you can set the unit to a higher temperature when you’re not home, then have it pre-cool 30 minutes before you arrive. That way, you’re not running AC in an empty house. You can also set a higher “away temperature” when you’re traveling to reduce energy costs. You may also want to program the temperature to be higher at night to take advantage of cooler night air, then set the thermostat to begin cooling as you wake. 

Changing the air filters

Clogged or dirty air filters can reduce airflow and efficiency. To make sure you get maximum efficiency out of your running wattage, keep air filters clean. According to the DOE, routinely replacing or cleaning your air filters can lower your AC’s energy consumption by 5-15%. 

As a general rule, air filters should be changed every 1-3 months to keep your system running efficiently. However, due to other factors — like having an older home, saltwater in the air, dusty conditions, or pets in the house — you may want to change your filter more often .

Clean the coils 

Plan to clean your AC unit coils once a year. Coil-cleaning services are available for hire, but you can also do this yourself.  If you choose to DIY, you’ll need a solution of mild household detergent (like dish soap) mixed with water in a spray bottle and a clean, dry rag. The coils are most commonly located behind a removable panel held in place by screws. (When in doubt, check your operator’s manual.) Once you’ve located the coils, wipe them down with a dry rag, then spray the solution. Using your rag, individually clean the coils until they’re satisfactory. If you live in an area where large amounts of dust and debris build up in or around your unit, consider cleaning the coils semi-annually to keep things running smoothly.

Schedule routine maintenance

The best practice is to get a professional AC unit tune-up once a year. By keeping routine maintenance on a reliable schedule, you can be sure that your unit is running as efficiently as possible and keeping your energy usage to a minimum. This is particularly important as the unit starts to age, or as temperatures begin to change.

Use a fan

This may seem obvious, but don’t forget the power of fans. They circulate air in a room, creating a wind chill effect that makes the room feel cooler to the people in it. The DOE even finds that ceiling fans can allow you to raise the thermostat setting by about 4 degrees without impacting your comfort! Using a fan in the most sweltering parts of the house – the bathroom and the kitchen – can also help remove heat and humidity from the home.

That said, remember to turn your fans off when you leave the room: they don’t cool off the room, just the people in it.

Take control of your home’s energy costs

Understanding your AC’s energy footprint is a smart first step towards managing your home’s overall electricity expenses. If you’re looking for ways to significantly reduce those costs and stabilize your monthly power bills, a home solar system can be a powerful solution. 

Compare quotes from multiple vetted solar installers and instantly see how much you could save on your energy bills, all in one place. 

Frequently asked questions

How many watts does a central air conditioner use?

A central air conditioner typically uses between 3,000 and 5,000 watts to run. In an average-sized home, that adds up to more than 2,000 kWh of electricity per year, making it one of the largest energy consumers in the home.

How many watts does a window AC unit use?

A window or room air conditioner typically uses between 500 and 1,500 watts, significantly less than a central system. The exact wattage depends on the unit’s BTU rating, SEER efficiency rating, and the size of the space it’s cooling.

How do I calculate how much electricity my AC uses?

The simplest method is to find your unit’s wattage (using the formula: BTU/h ÷ SEER = average running watts), then multiply by the number of hours per day it runs and divide by 1,000 to get your daily kWh. For example, an 800-watt unit running 8 hours a day uses 6.4 kWh per day.

How can I reduce my air conditioner’s energy usage?

A few of the most effective steps are using a programmable thermostat to avoid cooling an empty house, keeping filters and coils clean, ensuring your home is properly insulated and air-sealed, and taking advantage of off-peak electricity rates by pre-cooling your home overnight when energy costs are lower.

How many solar panels does it take to run an air conditioner?

It depends on your AC unit’s wattage and how many hours per day it runs. A central AC unit using 3,000–5,000 watts running for 8 hours a day consumes 24–40 kWh daily. Assuming a standard 400-watt solar panel produces roughly 2 kWh per day, you’d need approximately 12–20 panels to offset central AC usage alone. An Aurora solar advisor can give you a precise estimate based on your home and location.

How many watts does a portable air conditioner use?

A portable air conditioner typically uses 800 to 1,500 watts, depending on its BTU rating — generally a bit more than a window unit with the same cooling capacity, since portable units are less efficient by design. A 10,000 BTU portable unit, for example, runs at roughly 850–950 watts.

How many watts does a 12,000 BTU air conditioner use?

A 12,000 BTU air conditioner uses roughly 1,000 to 1,150 watts if it’s portable, or closer to 800–900 watts in a window unit, depending on its SEER rating. You can find the exact figure using the BTU ÷ SEER formula above with your unit’s specs.

Do window AC units use a lot of electricity?

Not especially. A typical window unit draws 500 to 1,500 watts — comparable to a space heater — which adds up over a summer but is far less than what a central AC system uses. Running one 8 hours a day at 1,000 watts costs roughly $1.28 a day at the national average electricity rate.